AV-over-IP Network Bandwidth and Switch Capacity Calculator
Check AV-over-IP uplink traffic, endpoint ports, and switch-fabric capacity using stream bitrates, delivery type, and LAG links.
Check AV-over-IP uplink traffic, endpoint ports, and switch-fabric capacity using stream bitrates, delivery type, and LAG links.
Estimate Dante or AES67 link bandwidth by direction, check link use, planning margin, and minimum port capacity.
Size an air receiver for a peak demand event or estimate compressor on time, off time, cycle time, and starts per hour.
Choose a copper speaker-wire gauge and estimate voltage drop, power shortfall, dB attenuation, and cable heat loss.
Size a single compressed-air pipe run, check pressure drop and air speed, and estimate pressure at the tool.
Calculate chromatic-dispersion-only fiber reach, check a route, and see accumulated CD and remaining CD headroom.
Calculate pump NPSH available in ft, compare it with NPSHr, and check your entered cavitation margin requirement.
Add 70V or 100V speaker tap loads, size an amplifier channel with reserve, and check existing amplifier capacity.
Calculate GPON or XGS-PON downstream and upstream receive power, passive loss, reserve clearance, and overload risk.
Estimate annual compressed-air leak cost, expected repair savings, and simple payback from spending, cycle-test, or survey-flow data.