Sam Gorman

Calculate receiver noise floor and estimated sensitivity from bandwidth and noise figure, or start with a known integrated noise floor.

Calculate DSP speaker delay in milliseconds, distance, and samples from acoustic path differences, temperature, and channel latency.

Estimate air compressor annual kWh and electricity cost from package kW or motor HP, run time, CFM, and your energy rate.

Check an OM3 or OM4 fiber route against a planning profile or published optic reach, then see the limiting distance and margin.

Estimate CCTV recording storage, installed drive capacity, and recorder ingest bandwidth from camera bitrate, schedule, and retention days.

Check AV-over-IP uplink traffic, endpoint ports, and switch-fabric capacity using stream bitrates, delivery type, and LAG links.

Estimate Dante or AES67 link bandwidth by direction, check link use, planning margin, and minimum port capacity.

Size an air receiver for a peak demand event or estimate compressor on time, off time, cycle time, and starts per hour.

Choose a copper speaker-wire gauge and estimate voltage drop, power shortfall, dB attenuation, and cable heat loss.

Size a single compressed-air pipe run, check pressure drop and air speed, and estimate pressure at the tool.