Sam Gorman

Size or check a condensate return pipe using load, pressure, flash steam, pipe schedule, and a velocity target.

Calculate steam trap capacity in lb/h, minimum pressure difference in psid, and check a candidate rating at the same chart pressure.

Estimate liquid flow from orifice plate DP, or find required DP for target flow using actual pipe ID, bore, density, and coefficient.

Estimate pump VFD energy savings, optional demand-charge savings, and simple payback from measured kW or motor nameplate data.

Find a centrifugal pump operating flow and head from pump curve points and either a known design point or pipe data.

Estimate ideal vacuum pump-down time from system volume, pressure change, and effective pump speed with US and metric unit support.

Estimate dryer purge airflow, annual compressor kWh, purge-air volume, and electricity cost from purge flow or purge percentage.

Estimate annual kWh and utility-bill savings from lowering compressed-air pressure, with optional demand-charge savings.

Check slurry carrying velocity, minimum flow, pressure drop, total head, and preliminary pump shaft power using US units.

Choose or check a Schedule 40 steam pipe using flow, velocity, route length, and a simplified pressure-drop estimate.