Sam Gorman

Estimate industrial oven warm-up and operating kWh, completed batches, good output, and electricity cost per run, batch, and unit.

Calculate flow rate and totalized volume from a flow meter K-factor, Hz reading, or timed pulse count in US gallons, liters, or m3.

Calculate load-cell bridge output, gain, ADC code spacing, load per count, and worst-case headroom before ADC clipping.

Estimate hydraulic heat load, reservoir heat rejection, and preliminary oil-cooler duty in BTU/hr and kW.

Correct an uncorrected thermal-camera temperature for emissivity and reflected apparent temperature in Fahrenheit or Celsius.

Estimate commercial fixture quantity and installed cost from a retrofit count or room dimensions, target light level, fixture lumens, and pricing.

Calculate screw conveyor capacity or required RPM, then estimate shaft power, torque, and a preliminary motor size.

Calculate dryer water removal, finished product, simplified heat load, and average power for continuous or batch operation.

Estimate recovered heat, avoided boiler fuel, annual net savings, and simple payback using fuel rates copied from US utility bills.

Estimate powder consumed, material cost, whole packages to buy, and optional per-part powder cost for a coating job.